> > > Splash Tutorial WoW Server Ascent 2.4.2 <

Copiati fisierele in ordine (daca nu le aveti deja instalate) pana la versiunea 3.5....vreau sa mentionez k trebuie sa aveti toate versiunile in calculator nu numai 3.5 sau 3

Ca sa vedeti daca le aveti instalate sau nu mergeti la Control Panel apoi Add or Remove Programs si cautati Microsoft NET.Framework....si versiunea respectiva....copiati doar versiunile pe care nu le aveti si upgradati daca trebuie

2-Copiati tot ce apare aici intr-un folder dp desktop...nu e importanta locatia doar sa le aveti la indemana

Fisiere pentru server

1-MySQL

2-SQlyog

3-Maps

4-Vmaps

Serveru cu tot ce va trebuie

1-Core win32 Openascent 291 cu update si optional warp&morph&buff&moon419 Click (fisiere recomandate de Jon)

2-Relase core 4561 +baza 2.4.2 Click here (Tot Jon)

Copiati tot intr-un folder dp desktop...aveti grija sa aveti cel putin 4 Gb liberi in C...nu conteaza unde il instalati atata timp cat instalarea se face corect...eu unul recomand instalarea pe desktop

1-Mai intai dezarhivati Ascent Release si restu de fisiere si faceti foldere separate pentru fiecare

Pentru restu de fisiere cititi mai jos...

1. Setare MySQL Server

INCHIDETI ORICE FEL DE FIREWALL SAU ANTIVIRUS

- Porniti executabilul

- Selectati Typical la setup type.

- Instalati programul.

- Cand s-a terminat de instalat, aveti grija ca Configure the MySQL Server now sa fie bifat.

- Alegeti Standard Configuration.

- Bifati Install As Windows Service.

- La security settings, bifati Modify Security Settings si selectati o parola la alegere.

- Apasati Next, Execute, si apoi Finish.

Puteti sa redeschideti firewallu/antivirusu etc.

2. Importarea bazelor de date

- Instalati SQLyog605.

- Dupa ce se termina instalarea, deschideti SQLyog.

- La MySQL host adress sa fie pus localhost user name root iar la Password puneti aceeasi parola pe care ati pus-o la MySQL, bifati Save password...si dati connect

- Creaza doua baze de date: Una numita world iar cealalta character. (Apasati CTRL+D sa creati o baza de date)

- Click dreapta pe character si dati Restore From SQL Dump.

- Cauta character_updates (si presupunand ca ati dezarhivat-o deja), selectati-o si apasati Execute. Inchideti dupa ce s-a terminat si mergeti la folderu Relase\Relase\updates s iacolo o sa apara character_updates si logon_updates importati fisierele de acolo in character cu Restore from SQL Dump...daca primiti erori treceti la fisieru urmator si tot asa...

- Acum e timpul pentru world. Duceti-va la Release si acolo o sa fie un Folder SQL, inauntru aveti un fisier mare cu numele Ascent dati Restore From SQL Dump sa o incarcati.

-De asemeni tot in folderul release la updates este world_updates importati toate fisierele de acolo in world...si daca la unele apar erori nu este nimica...treceti mai departe

3 (OPTIONAL)(mentionez de asemenea ca daca vreti sa instalati ce e aici trebuie sa stergeti mai intai tot din scripts_bin)-Din Core~\Core openascent 291&moon++&update copiati ce e in MOONscript_bin si puneti in folderu Relase\Relase\Ascent\script_bin...dupa ce ati facut asta deschideti SQlyog si de aici Core~\Core openascent 291&moon++&update\sql\updates moonplusplus_full importati tot prin Restore From SQL Dump in world...daca apar unele erori treceti la fisieru urmator...de asemenea dupa ce urmati pasul asta si va da erori la sfarsit in ascent-world.exe copiati peste fisierele deja existente in folderu Ascent ce e aici Core~\Core openascent 291&moon++&update\Openascent921\Openascent921...dar daca nu va da nici o eroare NU le copiati...

3. Configurarea fisierelor Ascent [LAN/NET]

- O sa fie 3 fisiere pe care trebuie sa le editati: ascet-world.confg, ascent-logonserver.confg si ascent-realms.confg)

- Deschideti ascent-world.confg cu Notepad. Tot ce trebuie modificat e scris cu rosu

QUOTE

#######################################################################

# Ascent Configuration File

# Last Update: $Id: ascent.conf 2080 2007-10-27 13:48:07Z burlex $

#######################################################################

/********************************************************************************

* How to use this config file: *

* Config files are in a block->variable->setting format. *

* A < signifies the opening of a block, the block name is expected after that. *

* After the block name, a space and then the settings sperated by = / ' '. *

* *

* e.g. *

* <block setting="0" someval = "1"> *

* *

* Comments can be in C format, e.g. /* some stuff */, with a // at the start *

* of the line, or in shell format (#). *

********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Database Section

# Database.Host - The hostname that the database is located on

# Database.Username - The username used for the mysql connection

# Database.Password - The password used for the mysql connection

# Database.Name - The database name

# Database.Port - Port that MySQL listens on. Usually 3306.

# Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Listen Config

# Host

# This is the address that the server will listen on.

# To listen on all addresses, set it to 0.0.0.0

# Default: 127.0.0.1 (localhost)

# WorldServerPort

# This is the port that the world server listens on.

# It has to be the same as what is specified in the

# realms table in the LogonDatabase.

# Default: 8129

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "0.0.0.0"

WorldServerPort = "8129">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Log Level Setup

# Console Logging Level

# This directive controls how much output the server will

# display in it's console. Set to 0 for none, or -1 to disable.

# -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug

# Default: 3

# World server packet logging feature

# If this directive is turned on, a file called `world.log`

# will be created in the server's directory and all packets

# sent and received by clients will be dumped here in bfg

# format.

# Default: 0

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Server Settings

# PlayerLimit

# This directive controls the amount of sessions that will be

# accepted by the server before it starts to add people to

# the server queue.

# Default: 100

# PlrUpdateDistance

# This directive controls the distance (internal yards) that the player can "see" up to

# and receieve updates for. For smaller servers, you can probably increase this number.

# Increasing this number will also increase the servers bandwidth consumption and CPU usage.

# Default: 80

# Motd

# This message will be displayed by the server in the chat

# box every time any user logs on. Colors can be used in the

# standard WoW format.

# Default: "No MOTD specified

# Send Build On Join

# This directive controls whether the server's internal revision

# will be sent to clients upon entering the world. Use it to help

# testers report bugs.

# Send Stats On Join

# This directive controls whether the server will send the online player

# count to a cilent when it enters the world.

# Breathing Setup

# If the breathing code is causing problems or you want to run a fun server, you can disable

# water checks by enabling this directive.

# Default: 1

# Level Cap

# This variable controls the level that stats will be generated up to internally.

# Beyond this level players can still see a higher level visually but their stats won't

# increase beyond this point.

# Default: 60

# Expansion 1 Level Cap

# This variable does the same thing as Level Cap above, except it applies to those who

# have the first expansion: The Burning Crusade.

# Default: 70

# Seperate Channels Control

# This directive controls whether horde and alliance chats will be seperated across channels.

# Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other

# across channels.

# Default: 0

# Compression Threshold

# This directive controls the limit when update packets will be compressed using deflate.

# For lower-bandwidth servers use a lower value at the cost of cpu time.

# Default: 1000

# Queue Update Rate

# This directive controls how many milliseconds (ms) between the updates

# that the queued players receieve telling them their position in the queue.

# Default: 5000 (5 seconds).

# Kick AFK Players

# Time in milliseconds (ms) that a player will be kicked after they go afk.

# Default: 0 (disabled)

# Connection Timeout

# This directive specifies the amount of seconds that the client will be disconnected

# after if no ping packet is sent. It is advised to leave it at the default.

# Default: 180

# Realm Type

# This is the realm type that will be used by the server to handle world pvp.

# Default: 0 (pve)(RPPVE)

# Other values: 1(pvp)(RPPVP)

# AdjustPriority

# Set the server to high process priority?

# Default: 0

# RequireAllSignatures

# This directive controls whether the full 10 signatures will be required in order

# to turn in a petition. Smaller servers would be better off having it turned off.

# Default: off

# ShowGMInWhoList

# This directive controls whether GM's will be shown in player's who lists or not.

# Default: on

# MapUnloadTime

# This directive controls whether to unload map cells after an idle period of <x> seconds.

# Use on smaller servers or servers that are memory-limited. The server without cell unloading

# can use over 1.2GB memory with all creatures loaded.

# Default: 0

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Server PlayerLimit = "100"

PlrUpdateDistance = "80"

Motd = "No MOTD specified."

SendBuildOnJoin = "1"

SendStatsOnJoin = "1"

EnableBreathing = "1"

LevelCap = "60"

Expansion1LevelCap = "70"

SeperateChatChannels = "0"

CompressionThreshold = "1000"

QueueUpdateInterval = "5000"

KickAFKPlayers = "0"

ConnectionTimeout = "180"

RealmType = "1"

AdjustPriority = "0"

RequireAllSignatures = "0"

ShowGMInWhoList = "1"

MapUnloadTime="0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Die Directive

# If this triggers it means you didn't read your config file!

# Just comment it or remove it when you've read this.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Power regeneration multiplier setup

# These directives set up the multiplier in which regen values will be

# multiplied by every 2 seconds.

# Powers:

# Power1 = Mana, Power2 = Rage, Power3 = Energy

# Reputation:

# Kill = Rep gained on kill, Quest = rep gained from quests

# Honor:

# Honor = multiplier used to calculate honor per-kill.

# PvP:

# PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)

# XP:

# The xp that a player receives from killing a creature will be multiplied

# by this value in order to get his xp gain.

# RestXP:

# Value is the amount of rest XP a player will recieve per minute of rest time.

# Drop(Color):

# These values will be multiplied by the drop percentages of the items for creatures

# to determine which items to drop. All default to 1.

# To allow you better control of drops, separate multipliers have been created for items

# of each quality group.

# DropMoney:

# This value will be multiplied by any gold looted and pickpocketed

# Save:

# Value in milliseconds (ms) that will be between player autosaves.

# Default: 300000 (5 minutes)

# SkillChance:

# The chance that you have to level up a skill in melee or a profession is multiplied

# by this value.

# Default: 1

# SkillRate:

# The amount of "levels" your skill goes up each time you gain a level is multiplied

# by this value.

# ArenaMultiplier

# Every week/day the arena points gained by a player will be multiplied by this value.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Rates Health="1"

Power1="1"

Power2="1"

Power3="1"

QuestReputation="1"

KillReputation="1"

Honor="1"

PvPTimer="300000"

Compression="1"

XP="1"

QuestXP="1"

RestXP="1"

DropGrey="1"

DropWhite="1"

DropGreen="1"

DropBlue="1"

DropPurple="1"

DropOrange="1"

DropArtifact="1"

DropMoney="1"

Save="300000"

SkillChance="1"

SkillRate="1"

ArenaMultiplier2x="1"

ArenaMultiplier3x="1"

ArenaMultiplier5x="1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# GM Client Channel

# This should be set to 'gm_sync_channel' for the My_Master addon to work.

# Default: gm_sync_channel

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Terrain Configuration

# Set the path to the map_xx.bin files and whether unloading should be enabled

# for the main world maps here. Unloading the main world maps when they go idle

# can save a great amount of memory if the cells aren't being activated/idled

# often. Instance/Non-main maps will not be unloaded ever.

# Default:

# MapPath = "maps"

# UnloadMaps = 1

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Log Settings

# Cheaters:

# This directive sets up the cheater logging file, if turned on any

# cheat / packet exploit / speedhack attempts will be logged here.

# GMCommands:

# These two directives set up the GM command logging fie. If turned on,

# most gm commands will be logged for this file for abuse investigation, etc.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Mail System Setup

# These directives control the limits and behaviour of the ingame mail system.

# All options must have Mail prefixed before them.

# ReloadDelay

# Controls the delay at which the database is "refreshed". Use it if you're

# inserting mail from an external source, such as a web-based interface.

# 0 turns it off.

# Default: 0

# DisablePostageCostsForGM

# Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.

# Default: 1

# DisablePostageCosts

# Disables postage costs for all players.

# Default: 0

# DisablePostageDelayItems

# Disables the one hour wait time when sending mail with items attached.

# Default: 1

# DisableMessageExpiry

# Turns off the 30 day / 3 day after read message expiry time.

# WARNING: A mailbox still cannot show more than 50 items at once

# (stupid limitation in client).

# Default: 0

# EnableInterfactionMail

# Removes the faction limitation for sending mail messages. Applies to all players.

# Default: 1

# EnableInterfactionMailForGM

# Removes the faction limitation for sending mail messages, but only applies

# to GM's. EnableInterfactionMail overrides this.

# Default: 1

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Mail ReloadDelay="0"

DisablePostageCostsForGM="1"

DisablePostageCosts="0"

DisablePostageDelayItems="1"

DisableMessageExpiry="0"

EnableInterfactionMail="1"

EnableInterfactionMailForGM="1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Status Dumper Config

# These directives set up the status dumper plugin. Filename is an

# absolute or relative path to the server binary. Interval is the

# time that the stats will be dumped to xml.

# Default: stats.xml / 120000 (2 minutes)

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Startup Options

# Preloading

# This directive controls whether the entire world will be spawned at server

# startup or on demand. It is advised to leave it disabled unless you are a

# developer doing testing.

# Default: off

# Background Loot Loading

# This directive controls whether loot will be loaded progressively during

# startup or in the background in a seperate thread. Turning it on will

# result in much faster startup times.

# Default: on

# Multithreaded Startup

# This controls whether the server will spawn multiple worker threads to

# use for loading the database and starting the server. Turning it on

# increases the speed at which it starts up for each additional cpu in your

# computer.

# Default: on

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Startup Preloading = "0"

BackgroundLootLoading = "1"

EnableMultithreadedLoading = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Flood Protection Setup

# Lines

# This is the number of "messages" or lines that it will allow before stopping messages from

# being sent. This counter is reset every "Seconds" seconds.

# Default: 0 (disabled)

# Seconds

# This is the number of seconds inbetween the Line counter being reset.

# Default: 0 (disabled)

# SendMessage

# If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."

# message will be sent upon flood triggering.

# Default: 0

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# LogonServer Setup

# DisablePings

# This directive controls whether pings will be sent to the logonserver to check

# if the connection is still "alive". Expect problems if it is disabled.

# Default: 0

# RemotePassword

# This directive controls the password used to authenticate with the logonserver.

# It must be the same between the two configs. If it is not, your server will

# not register.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer DisablePings = "0"

RemotePassword = "change_me_world">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# AntiHack Setup

# Teleport

# This directive controls anti-teleport hack checks will be enabled or not.

# Default: 1

# Speed

# This directive controls anti-speed hack checks will be performed on player movement or not.

# Default: 1

# FallDamage

# This directive controls anti-fall damage hack checks will be performed on player movement or not.

# Default: 1

# Flying

# This directive controls whether flight hacks will be performed on players or not.

# Default: 1

# DisableOnGM

# This directive controls hack checks will be disabled for GM's or not.

# Default: 0

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AntiHack Teleport="1"

Speed="1"

FallDamage="1"

Flying="1"

DisableOnGM="0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Period Setup

# These are the periods that the server will wait before doing periodic duties. At the moment only

# arena point calculation and honor point calculation are used here.

# Default:

# Arena: weekly

# Honor: daily

# (blizzlike values)

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Periods HonorUpdate="daily"

ArenaUpdate="weekly">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# AscentStats Setup *** PRIVACY NOTE: READ ME CAREFULLY ***

# These are the values that the AscentStats client uses while communicating with an AscentStats server.

# Statistics will be sent anonymously if a server guid is not set.

# If you do not want your ascent client communicating with AscentStats servers, disable it here.

# No personally-identifiable information is sent in these transmissions. The actual data sent is:-

# If you don't mind your server transmitting this information, please leave AscentStats enabled. It

# allows our developers to understand our users needs better and in the end provide you with a better

# product.

# Enable

# To disable stat transmission completely, set this to 0.

# ServerGUID

# This is the GUID assigned to your server by the AscentStats server. To register your server, go

# to http://www.example.com/ascentstats/register_server.php

# ServerKey

# This is the key used to secure stats sent by your server so they can't be forged. This key is

# obtained after registering your server.

# Default:

# Enabled

# Server Key "NONE"

# Server GUID "NONE"

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AscentStats Enable="1"

ServerGUID="NONE"

ServerKey="NONE">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Channels Setup

# These directives control some of the aspects in the channel system.

# BannedChannels

# If you would like to ban users from creating or joining a channel specify them here in a ';'

# seperated list.

# Default: ""

# GeneralChannels

# These are the default channels that the client joins and cannot have leaders.

# Default: "General -;Trade -;LookingForGroup;GuildRecruitment;LocalDefense;WorldDefense;"

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Channels BannedChannels=""

GeneralChannels="General -;Trade -;LookingForGroup;GuildRecruitment;LocalDefense;WorldDefense;">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# VoiceChat Setup

# These directives control some of the aspects in the voice chat system.

# Enabled

# If you want to enable the voice chat system, this must be set to 1.

# Default: "0"

# ServerIP

# This is the IP of the voice chat server.

# Default: "127.0.0.1"

# ServerPort

# This is the TCP port of the voice chat server.

# Default: "3727"

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<VoiceChat Enabled="0"

ServerIP="127.0.0.1"

ServerPort="3727">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Die Directive

# You should know what to do here

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Localization Setup

# LocaleBindings

# This is a list of locale names and the other locale you want to associate with them.

# For example, to make the European client always use the french language, "enGB=frFR"

# Must be terminated by a space.

# Default: ""

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

- Modifica host cu localhost.

- Modifica username cu root.

- Schimba passwd cu parola pe care ai puso in MySQL.

- Schimba primu rand de sus database cu world.

- Schimba randul de mai jos database cu character.

- Sterge (<die msg="I am a newb who didn't even read half my config file!">).

- Schimba la change_me_world cu ce vrei tu...e recomandat sa pui aceeasi parola ca si MySQL

- Sterge a doua chestie cu ( <die2 msg="I read nearly all my config file, but not the whole thing!">).

- Sterge frFR=enGB (sau ce apare acolo daca apare ceva) astfel incat sa arate asa <Localization LocaleBindings="">.

- Deschide logonserver.conf (ascent-logonserver.confg) cu Notepad. Tot ce trebuie modificat e cu rosu.

QUOTE

#######################################################################

# Ascent Realms Configuration File

# Last updated at revision 446 by Burlex

#######################################################################

/********************************************************************************

* How to use this config file: *

* Config files are in a block->variable->setting format. *

* A < signifies the opening of a block, the block name is expected after that. *

* After the block name, a space and then the settings sperated by = / ' '. *

* *

* e.g. *

* <block setting="0" someval = "1"> *

* *

* Comments can be in C format, e.g. /* some stuff */, with a // at the start *

* of the line, or in shell format (#). *

********************************************************************************/

# LogonDatabase Section

# These directives are the location of the `realms` and `accounts`

# tables.

# LogonDatabase.Host - The hostname that the database is located on

# LogonDatabase.Username - The username used for the mysql connection

# LogonDatabase.Password - The password used for the mysql connection

# LogonDatabase.Name - The database name

# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.

# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g

<LogonDatabase Hostname = "host"

Username = "user"

Password = "pass"

Name = "dbname"

Port = "3306"

Type = "1">

# Host Directive

# This is the address that the realmlist will listen on.

# To listen on all addresses, set it to 0.0.0.0

# Default: 127.0.0.1 (localhost)

# Note: ISHost is the interserver communication listener.

<Listen Host = "0.0.0.0"

ISHost = "0.0.0.0"

RealmListPort = "3724"

ServerPort = "8093">

# Server console logging level

# This directive controls how much output the server will

# display in it's console. Set to 0 for none.

# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug

# Default: 3

<LogLevel Screen = "0"

File = "-1">

# Account Refresh Time

# This controls on which time interval accounts gets

# refreshed. (In seconds)

# Default = 600

# Accepted Build Range Setup

# These two directives set up which clients will be

# allowed to authenticate with the realm list.

# Set these to the same builds that the server was

# compiled for.

# As of the last update, version 2.1.1 was build 6739.

<Client MinBuild = "6739"

MaxBuild = "6739">

# WorldServer Setup

# This directive controls the password used to authenticate with the worldserver.

# It must be the same between the two configs. If it is not, your server will

# not register.

# Default: "change_me_logon"

- Schimba host to localhost.

- Schimba user cu root.

- Modifica pass cu parola pe care ai puso la MySQL.

- Modifica dbname cu character.

- Modifica Max Build 6739 cu 9999. Pentru a elimina erorile cu versiunea incorecta.

- Schimba change_me_world cu aceeasi parola pe care ai puso in ascent.conf.

- Deschide realms.conf (ascent-realms.confg) cu Notepad. Tot ce trebuie modificat e scris cu rosu.

QUOTE

#######################################################################

# Ascent Realms Configuration File

# Last updated at revision 446 by Burlex

#######################################################################

/********************************************************************************

* How to use this config file: *

* Config files are in a block->variable->setting format. *

* A < signifies the opening of a block, the block name is expected after that. *

* After the block name, a space and then the settings sperated by = / ' '. *

* *

* e.g. *

* <block setting="0" someval = "1"> *

* *

* Comments can be in C format, e.g. /* some stuff */, with a // at the start *

* of the line, or in shell format (#). *

********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# LogonServer Section

# Address:

# The address (no port) of the server.

# Port:

# The port on which the logon server listens. (*** NOT 3724 ***)

# Name:

# Not really relavant, but name the logon.

# RealmCount:

# The number of realms in the next section.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "127.0.0.1"

Port = "8093"

Name = "Default Logon"

RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Realm Section

# Name:

# The name of the realm.

# Address:

# The address (and port) of that realm.

# Icon:

# The type of realm (PVP, Normal, RPPVP, RP)

# Colour:

# Realm colour in realm list display.

# TimeZone:

# Time zone the realm is in.

# Population:

# (0 = low, 1 = medium, 2 = high)

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Test Realm"

Address = "127.0.0.1:8129"

Icon = "PVP"

Colour = "1"

Population = "1.0"

TimeZone = "1">

- Schimba Test Realm cu numele pe care vrei sa il aiba serveru tau.

- Schimba 127.0.0.1 cu IP tau (e recomandat ip fix, nu rutabil). dar scrie acolo ip tau

4. Configurare Ascent [Internet]

- Click aici si creaza un cont nou.

- Dute la Services, apoi Dynamic DNS, apoi Get Started (linku e pe dreapta).

- Scrie cum vrei sa se numeasca hostu tau(numele la server) si apoi alege domain.

- Bifeaza wildcard option.

- Jos la IP address, copiel pe cel pe care il autodetecteaza.

- Click Create Host.

- Dute in C:\WINDOWS\system32\drivers\etc\ si deschide HOSTS cu Notepad.

- Pune asta jos in pagina astfel incat sa arate asa:

QUOTE

# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.

# This file contains the mappings of IP addresses to host names. Each

# entry should be kept on an individual line. The IP address should

# be placed in the first column followed by the corresponding host name.

# The IP address and the host name should be separated by at least one

# space.

# Additionally, comments (such as these) may be inserted on individual

# lines or following the machine name denoted by a '#' symbol.

# For example:

# 102.54.94.97 rhino.acme.com # source server

# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost

127.0.0.1 (aici pui ce ai scris tu la domeniu la site-ul respectiv exemplu blizzard.servegame.org nu conteaza...ce am scris eu doar sa pui ce ai creat tu)

(aici pui IP tau) (la fel ca mai sus domeniu)

(Ip tau din nou) (domeniu din nou)

Daca aveti router dati forward la urmatoarele porturi

CODE

3724 - 3724

80 - 80

3306 - 3306

8129 - 8129

8093 - 8093

6112 - 6112

6881 - 6999

3036 - 3036

8050 - 8050

- Urmeaza instructiunile de mai jos pentru Internet

- Deschide realms.conf cu Notepad. Tot ce trebuie modificat e scris cu rosu.

QUOTE

#######################################################################

# Ascent Realms Configuration File

# Last updated at revision 446 by Burlex

#######################################################################

/********************************************************************************

* How to use this config file: *

* Config files are in a block->variable->setting format. *

* A < signifies the opening of a block, the block name is expected after that. *

* After the block name, a space and then the settings sperated by = / ' '. *

* *

* e.g. *

* <block setting="0" someval = "1"> *

* *

* Comments can be in C format, e.g. /* some stuff */, with a // at the start *

* of the line, or in shell format (#). *

********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# LogonServer Section

# Address:

# The address (no port) of the server.

# Port:

# The port on which the logon server listens. (*** NOT 3724 ***)

# Name:

# Not really relavant, but name the logon.

# RealmCount:

# The number of realms in the next section.

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "127.0.0.1"

Port = "8093"

Name = "Default Logon"

RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

# Realm Section

# Name:

# The name of the realm.

# Address:

# The address (and port) of that realm.

# Icon:

# The type of realm (PVP, Normal, RPPVP, RP)

# Colour:

# Realm colour in realm list display.

# TimeZone:

# Time zone the realm is in.

# Population:

# (0 = low, 1 = medium, 2 = high)

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Test Realm"

Address = "127.0.0.1:8129"

Icon = "PVP"

Colour = "1"

Population = "1.0"

TimeZone = "1">

- La Test Realm schimba numele cu ce vrei tu

- iar la 127.0.0.1 pune domeniu pe care tocmai l-ai creat (ex:blizzard.servegame.org...sau ce ai ales tu acolo)

- Daca ai prb cu unele persoane care nu se pot conecta la serveru tau incearca sa schimbi cu ip tau fix

5. Extragere Maps si Vmaps

- Dute in directorul WoW si creeaza un folder si numestel maps, copie ad.exe din Relase\Relase\Ascent\maps\map_extractor

si punel in directorul la WOW

- Ruleaza ad.exe si asteapta mult si bine. Dureaza in functie de PC tau sau dak il folosesti sau nu in timpul asta

- Dupa ce e gata folderu ar trebui sa fie destul de marisor

- Acum tot ce trebuie sa faci e sa copii folderu maps in directorul la Serveru ascent. Relase\Relase\Ascent si sa stergeti ce e in folderu maps care e deja acolo si sa copiati maps din WoW

VMaps

faceti un folder in Wow....cu numele Vmaps apoi toate fisierele de aici Relase\Relase\Ascent\vmaps\vmap_extractor copiatile in folderu Wow...si porniti mai intai vmapextract_v2 si asteptati(1-2 ore depinde de PC)...apoi dupa ce sa terminat rulati vmap_assembler(1-3 ore depinde de PC)..dupa ce termina o sa ai doua foldere buildings si vmaps...copiati vmaps in serveru Ascent...(nu uitati mai intai sa stergeti folderele care sunt inauntru la vmaps deja existent acolo) si gata...ar trb sa aveti collision mod activat

6. Crearea Accounturilor

- Deschide SQLyog.

- Dute la character, si apoi la accounts.

- Selecteaza Table Data care e undeva prin dreapta si scrie la Acct un numar (in ordine 1,2,3, etc.)...La Login scrie numele cu care vrei sa te conectezi iar la password scrie parola cu care vrei sa te conectezi...la gm scrie AZ daca vrei admin...iar apoi la Flags unde trb sa schimbi din 0 cu 8

- Deasupra la Acct este o discheta albastra da click pe ea in timp ce ai selectata casuta de la Flags...ca sa se salveze klumea

- Si cam atat...dak vrei sa intre si prietenii tai intri aici si faci alte accounturi...

- DACA va cere sa salvati cand iesiti din program scrieti un nume oarecare la Save si pune-l undeva ...nu prea conteaza

7. Cum sa te conectezi la Server [LAN/NET]

- Dute in folderu tau WoW si deschide realmlist.wtf cu Notepad.

- Sterge ce scrie acolo si pune: set realmlist 127.0.0.1

By Splash Team